Follow

VISIONDRIVE Recorder Software for all models - SEE NOTES

NOTE THAT IF YOU DOWNLOAD AND INSTALL THE *INCORRECT VERSION* OF SOFTWARE FOR YOUR RECORDER THE RECORDER MAY NOT OPERATE AND CANNOT BE RESOLVED WITHOUT RETURN TO THE MANUFACTURER IN KOREA.  

WE ACCEPT NO LIABILITY NOR DAMAGES NOR COSTS IN ANY WAY SHOULD YOU APPLY THE WRONG SOFTWARE VERSION UPDATE TO YOUR VISIONDRIVE RECORDER. 

IF YOU ARE UNSURE WHICH VERSION TO APPLY DO NOT PROCEED FURTHER AND PLEASE CONTACT US VIA THIS SUPPORT PORTAL QUOTING YOUR MODEL AND SERIAL NUMBER. 

WE ARE NOT OBLIGATED TO SUPPORT ANY VISIONDRIVE RECORDER THAT WE DO NOT SELL IN AUSTRALIA.

 

Here are the steps to install the software onto any SD card.

Reformat your SD card(s) using FAT32. It MUST be FAT32.

We have a utility for this which can be downloaded from here if you cannot work out how to do this in windows.

For SD cards larger than 32GB you might also have to use a USB adapter along with this utility as in some cases Windows cannot manage SD cards larger than 32GB.

GUIFORMAT PROGRAM


Download the software for your recorder** via the link below (SEE NOTE BELOW TOO) and unzip/expand to a folder on your desktop - then copy the contents of that folder to the SD card.  The SD card cannot contain ZIP files or folder - it must only have the contents of the ZIP file and nothing more.

VISIONDRIVE SOFTWARE

This DROPBOX folder contains full releases for all VISIONDRIVE model recorders.



**NOTE THAT IF YOU DOWNLOAD AND INSTALL THE *INCORRECT VERSION* OF SOFTWARE FOR YOUR RECORDER THE RECORDER MAY NOT OPERATE AND CANNOT BE RESOLVED WITHOUT RETURN TO THE MANUFACTURER IN KOREA.  

WE ACCEPT NO LIABILITY NOR COSTS IN ANY WAY SHOULD YOU APPLY THE WRONG VERSION UPDATE TO YOUR VISIONDRIVE RECORDER.  IF YOU ARE UNSURE WHICH VERSION TO APPLY DO NOT PROCEED FURTHER AND PLEASE CONTACT US VIA THIS SUPPORT PORTAL QUOTING YOUR MODEL AND SERIAL NUMBER.


Once the files have been copied to the SD card(s) - open VDANALYZER on the new SD card and reconfigure as required (time zone and Daylight Savings Time and if a truck put all shock settings at value 10).

You need to make them all 10 for a TRUCK of the recorder will operate in EVENT mode more than NORMAL mode.

 

The VD-9500 and 9600 models also allow configuration to be performed via the touch screen on the recorder itself.

I repeat - there should be no folders or zip files on the SD card - just the recorder files.

0 Comments

Article is closed for comments.
Powered by Zendesk